51ºÚÁÏ

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.2 The Built Environment Life Cycle Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.8 Health and Safety Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

This is a student friendly powerpoint with lessons/ instructions and examples for students and teachers to complete Unit 1. The brief is the one that has been issued by WJEC (Re-design a phone charger) However it can be adapted to any brief you wish to set. The key areas covered are: Understanding the Brief Market Research Specification Design Ideas 3rd Angle Evaluation against Specification

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.5 Building Structures and Forms Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.3 Types of Building and Structure Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

**Unit 3 Constructing the Built Environment ** Controlled assessment framework booklet for students that can be fully adapted to choice of Scenario and Task. Excel tracker for controlled assessment tasks that links directly to the booklet. My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources. ** Please note this resource is available as part of my EDUQAS Construction and the Built Environment Starter Resource Bundle**

Lesson Powerpoint and activities for learning how the different forces (COMPRESSION, TENSION, TORSION AND SHEAR) and the different types of structures shell vs frame. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson. This resource includes: Leveled WALT and WILF (Learning Objectives) Starter, main and plenary (printable worksheets within powerpoint) Lots of visual stimuli and printable resources included in powerpoint This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)

A student/ teacher RAG (Red, Amber, Green) sheet that links directly to all the core content that students need to learn for the the exam in the Edexcel Design Technology (1-9) course. It links directly to to the specification and text book from the exam board and is a useful way for students to track their knowledge when it comes to revision but for teachers to measure progress…

A set of lessons which cover Edexcel Design and Technology Core Content Objective 1.8 Categorisation of Ferrous and Non- Ferrous Metals. The Powerpoint covers: Ferrous/ Non Ferrous, Mechanical and Physical properties, ductility, Malleability and hardness All topics are directly taken from the textbook and course specification. A student friendly powerpoint with: Interesting activities Keywords and descriptions Starters and plenaries Levelled WALTS and WILFS (learning outcomes) Practice exam questions Appropriate levels of challenge This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.

A lesson which covers Edexcel Design and Technology Core Content Objective AC1.5 Mechanical Devices. The Powerpoint covers: Levers, motion, Velocity Ratio, Mechanical Advantage and efficiency. All topics are directly taken from the textbook and course specification. A student friendly powerpoint with: Interactive starter Keywords and description Levelled WALTS and WILFS (learning outcomes) Practice questions and modelled examples Appropriate levels of challenge This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.

Brand New Controlled Assessment Template for the 2025 Unit 3 EDUQAS Construction Brief focusing on the Tiling Practical Skill. The template can be adapted or changed to suit the school but provides a clear framework that hits all the key assessment criteria to ensure student success. This can be bought as part of a bundle- very good value. This will include a template for Bricklaying, Tiling and Carpentry and detailed ‘How To Guide’ to support the teaching and learning of UNIT 3!

Practical Skills Tiling Job Cards. A double sided document that can be laminated for use in a practical setting. All the information needed for students to complete the practical task is on the sheet with visual aids. This can help build independence before the NEA practical tasks. The Job Cards include: -A Design Brief -Job Requirements (measurements) -Pictures/ plans -Quality standards -Assessment criteria Resource suitable for EDUQAS/ WJEC / BTEC and City and Guilds qualification This resource can be bought as part of a wider bundle of job cards that include other practical skills: Brickwork, Painting, Plumbing. Please check out my TES shop for high quality construction resources including whole units of work for the new EDUQAS specification.

Practical Skills Brickwork Job Cards. A double sided document that can be laminated for use in a practical setting. All the information needed for students to complete the practical task is on the sheet with visual aids. This can help build independence before the NEA practical tasks. The Job Cards include: -A Design Brief -Job Requirements (measurements) -Pictures/ plans -Quality standards -Assessment criteria Resource suitable for EDUQAS/ WJEC / BTEC and City and Guilds qualification This resource can be bought as part of a wider bundle of job cards that include other practical skills: Tiling, Painting, Plumbing. Please check out my TES shop for high quality construction resources including whole units of work for the new EDUQAS specification.

A student work booklet for the WJEC Constructing the Built Environment Unit 1: Safety and Security in Construction. Lots of different worksheets with content taking directly from the Specification and following each of the learning objective and assessment criteria in order. The booklet is full of different types of tasks and activities with lots of visual stimuli. Plenty of opportunity for student self assessment and teach assessment. This booklet will help students learn the key topics for the exam but also use it as revision later on and teacher can track knowledge. This is a resource very suitable for lower ability students. Topics Covered: Signs (RED, BLUE, YELLOW, GREEN, ORANGE) Risk Assessments Sub and Super Structure Fire extinguishers Permits to Work Hazard/ Risk/ Control Measure Security of Construction Site Health and Safety Legislation Responsibility of Employer and Employee This resource can also be purchased as part of a bundle with the Unit 1 Safety and Security powerpoint found in my shop!

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.7 Trades, Employments and Careers Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

A student friendly powerpoint including 4-5 lessons covering materials and processes taken directly from the BTEC Engineering Unit 1 specification A number of interesting activities (Starters, pleneries etc) and leveled learning objectives. This can be used for Product Design and is very versatile. Uses superhero (marvel) example to help children relate. Topics Covered: Material Classification: Smart, High Performance, Modern and Composite Uses (Products) Sectors of Engineering Manufacturing Processes Forces Deformation

A Powerpoint lesson on Bionics and how they have been developed by Biomedical Engineers. A number of activities, starter, You Tube examples and leveled learning objectives. Created for BTEC Engineering Unit 1 using information from the specification however can be used in STEM lessons or Design Technology Lessons. Learners can begin to understand the wider topic of new technologies.

A student friendly powerpoint covering two lessons on Aerodynamics and Blended Wingbodies based on the BTEC Engineering Unit1 Specification . 2- 3 lessons with a number of activities (starters etc.) which is can be used in Engineering but also other areas of Design Technology and STEM. Road bikes are used as an example to help students relate to the topic.

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.1 The Sector Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle